Tested the piece for lead with this lead paint kit

Sanded the entire piece with 80 grit sandpaper

Removed failing veneer from almost the entire piece

Sanded again with 120 grit sandpaper and then 180 grit sandpaper

Wiped clean with soap and water

Filled extremely damaged areas with Bondo Filler

Filled the grain and less damaged areas with Bondo Glazing and Spot Putty

Applied three coats of Zinsser oil-based primer, sanding with 400 grit sandpaper in between each coat

Applied three coats of Sherwin Williams Emerald Urethane Trim Paint in “Caviar” with a satin finish, sanding with 400 grit sandpaper in between each coat

Applied three coats of Minwax Polycrylic in clear satin, sanding with 400 grit sandpaper in between each coat

Replaced the cabinet door hinges

Lined all drawers and the bottom of the cabinet in peel-and-stick wallpaper

Added new antique bronze 3/4 inch knobs